Decarboxylation (decarb process) of marijuana is the process of heating the plant to activate its psychoactive compounds. This is important because raw marijuana does not have the same effects as decarboxylated marijuana since many of its active ingredients are still bound up in carboxylic acids.

There are several different methods for decarboxylating marijuana, including using an oven, a rice cooker, a sous vide, or a slow cooker. These methods typically involve heating the plant at low temperatures for several hours to fully activate the psychoactive compounds.

The benefits of decarboxylated marijuana are numerous. Not only does it produce a stronger and more potent high, but it also allows you to control the effects of your cannabis. Additionally, decarboxylated marijuana is much easier to use in cooking and baking, allowing you to infuse your recipes with all of its amazing benefits. Lastly, infusing your own oils/butter will save money.

In this article, we'll be going over the following decarboxylation topics:

1. What is the decarboxylation of marijuana and why is it important

2. How to use a sous vide as a decarboxylation machine

3. The benefits of decarboxylated marijuana

4. How to use decarboxylated marijuana in cooking and baking

5. Tips for storing decarboxylated marijuana

What is the decarboxylation of marijuana and why is it important

The decarboxylation of marijuana is an important process that every cannabis lover needs to know about. This is because the psychoactive compounds in marijuana are activated by heating the plant, which produces a stronger and more potent high. Additionally, decarboxylated marijuana is much easier to use in cooking and baking, allowing you to infuse your recipes with all of its amazing benefits.

Decarbing weed is a mandatory process for infusing edibles with THC. The main reason that decarboxylation is so important is because raw marijuana does not contain any psychoactive compounds, meaning it has no effects on the mind or body. In order to activate these compounds and produce a high, you must first decarb the marijuana to activate the THC (tetrahydrocannabinol).

How to use a sous vide as a decarboxylation machine

If you're looking for a foolproof way to decarboxylate your marijuana, then the sous vide is the machine for you. This device uses low temperatures and a water bath to gently heat your cannabis, activating all of its psychoactive compounds.

To use a sous vide as a decarboxylation machine, you'll need to set it to 200 degrees Fahrenheit and cook your marijuana for 1-2 hours. Once it's done, you'll have perfectly activated marijuana that can be used in cooking and baking.

What you'll need to get started

Getting started with using a sous vide as a decarb machine is a piece of cake.

All you'll need is the following:

A sous vide that can go up to 200 degrees F
Freezer bags
Plant material
Weights for keeping the cannabis submerged in the water

The process of decarboxylating marijuana with a sous vide

To decarb first weigh out how much cannabis you want to use. You can break up the buds or leave them whole. Next, place the cannabis in a vacuum-sealed bag. You may need to weigh the bag down to keep it submerged in the water.

Then, set your sous vide to 200 degrees F and let it sit for 1-2 hours. Once it's done, you'll have perfectly decarboxylated marijuana that is ready to be infused.

Note: Make sure to keep the cannabis fully submerged in the water at all times. The water must surround the marijuana so be sure there are no air pockets in the freezer bag.

Here is a video on using a sous vide as a decarboxylation machine.

Decarboxylation Machines: Benefits of Using a Sous Vide

Accurate temperature control so you can't overcook your weed
Made from stainless steel so you don't get any nasty contaminants in your pot
Easy to process multiple ounces of flower
Full THC activation, maximum potency
Easy to clean
Portable so you can take it anywhere
Price - A sous vide only costs $140 and you can use it for actual cooking as well

How to store your decarboxylated marijuana

Once you've decarboxylated your marijuana, it's important to store it properly so that its effects last as long as possible. One of the best ways to do this is by placing your cannabis in a vacuum-sealed container with an oxygen absorber inside. This will prevent oxidation and keep the marijuana fresh for longer periods of time.

Tips for using decarboxylated marijuana in cooking and baking

When using decarboxylated marijuana in cooking and baking, always make sure to follow the recommended dosage guidelines. If you're not sure how much to use, it's best to start small and slowly increase your dosage as needed. Additionally, it's always a good idea to consult a doctor before adding cannabis to your diet.

The benefits of decarboxylated marijuana

Marijuana has a long history of use for medicinal purposes, and recent research suggests that it may have a number of beneficial properties. One of the most important is its ability to act as an analgesic, or pain reliever. Additionally, marijuana may be helpful in treating conditions like epilepsy, multiple sclerosis, and chronic pain.

The benefits of the decarboxylation of marijuana are numerous and can provide relief for a variety of conditions. By activating the psychoactive compounds in the plant, decarbing makes marijuana more potent and easier to use in cooking and baking.

The benefits of decarboxylated marijuana for medical purposes

One of the biggest benefits to decarb your herb is to use them in edibles. Edibles are fantastic because you can infuse THC into any type of fat.

This includes:

Butter
Coconut oil
Olive oil
MCT oil
Avocado oil

How to use decarboxylated marijuana in cooking and baking

Cooking with cannabis herb is so easy! Simply take your infusion and use it in the recipe of your choice. That's all there is to making edibles! You can use your olive oil infusion for salad dressing. You can use your infused butter for cookies, brownies, cakes, candy, and the list goes on.

You can use your infusion for really anything. I use my infused butter for my coffee which is both delicious and gives me a nice relaxing boost of energy.

So if you're looking for a convenient and easy way to enjoy the benefits of medical marijuana, decarboxylate your weed, infuse your oil of choice, and start cooking!

How to dose your marijuana for cooking and baking

Dosing edibles is often a source of confusion, but it's actually quite simple. We dose edibles in milligrams (mg). You can figure out how many milligrams are in your infusion by using an edibles dosage calculator.

Here is a link to a great herbal dosage calculator: Hempster Dosage Calculator

Once you figure out how much THC is in your oil, you can use the chart below to make sure you are not consuming too much weed.

1 - 2.5 mg is a microdose
3 - 5 mg is a low dose
10 - 15 mg is a moderate dose
20 - 30 mg is considered a high dosage

If you're new to cooking with cannabis or haven't used decarboxylated marijuana before, it's best to start with a lower dose and then increase as needed. Factors such as weight, what food you ate, metabolism, tolerance, and experience with weed all make a difference in figuring out the correct weed dosage for you. Please consult with your doctor to figure out what size dose you should be taking.

What are some good recipes to try?

There are endless possibilities when it comes to cooking with cannabis and making edibles! Some of our favorite recipes include cannabis-infused brownies, weed cookies, cannabis butter, infused salad dressing, and marijuana tacos.

For the brownies, I just buy a mix and use my herbal butter in the recipe. It only takes me about 10 minutes of mixing and half an hour to bake in the oven and then I have a week's worth of edibles at my disposal. You can also check the internet for any type of food you wish to make and simply use the infusion of your choice.

If you're looking for something a little more adventurous, you can also try making marijuana-infused gummies, infused drinks, or cannabis-infused chocolates. The possibilities are endless, so be creative and have fun experimenting with different recipes and flavors!

Whether you're cooking for medical or recreational purposes, decarboxylated marijuana is a versatile and easy way to enjoy all of the benefits of this powerful plant. So what are you waiting for?

How can I make my own cannabis-infused oil or butter?

We've already spoken about decarboxylation and how that is the first step in making edibles. Now we'll go over what to do once you decarboxylate your cannabis.

There are several different ways to make infused oil or butter. The easiest way is to simply add the ground cannabis to a heated pan of oil and allow it to cook for 30-60 minutes, stirring occasionally. You can use any type of cooking oil that suits your needs, including olive oil, coconut oil, avocado oil, etc.

Once the mixture has finished cooking, you need to strain out the herbs. You can use a 190-micron filter bag, cheesecloth and strainer, or a coffee filter. Your goal is to get all the large pieces of herbs out of your oil.

Tip: You can squeeze the filters to get more infused goodness out of the bud.

Using Magical Butter Machines

You can view our review of the Magical Butter machine here. For people who don't want to read the review, if you can afford to buy the Magical machine, then definitely do so. It takes all the confusion out of making herbal edibles.

Here are the instructions for the MBM:

Weigh your herb
Choose the amount of oil or butter for your infusion (the amount of herb and oil you use with determine the amount of THC in the mixture
Choose your temperature and time
Hit start and let the Magical machine do its job
Once it's done you'll have to strain the plant material out of the mixture (Magical butter includes a fantastic filter bag)
Put your mixture in the fridge for storage or pour it into molds

Tips for storing decarboxylated marijuana

Storing decarboxylated marijuana is important in order to preserve its potency and keep it fresh for future use. Here are some tips for keeping your weed safe and effective:

Store your decarbed cannabis buds in an airtight container glass mason jar. Make sure that the container is kept in a cool, dark place to prevent exposure to light and heat.
If you plan on using your decarboxylated marijuana for cooking or baking, be sure to label it clearly with the date and any other necessary information.
Be careful of using plastic storage containers as these can leech into your decarbed flower.
Plan to use your decarbed flower within 3-6 months after decarboxylation.

Conclusion

Now that you know how to decarboxylate your marijuana, it's time to start cooking! There are many different recipes online for cannabis-infused edibles, so be sure to explore and find one that suits your taste. Remember to always use caution when cooking with marijuana and start with a small dose until you know how the recipe affects you.

=>Storing decarbed marijuana is important in order to preserve its potency and keep it fresh for future use. Be sure to store your weed in an airtight container in a cool, dark place. Label your container clearly with the date and any other necessary information. Use your decarbed flower within 3-6 months after decarboxylation for best results.

Decarboxylation Machines FAQ

1. What is decarboxylation and why is it important?

Decarboxylation is the process of heating marijuana in order to activate its psychoactive compounds, such as THC and CBD. This step is important because raw marijuana does not have the same effects as decarboxylated marijuana since many of its active ingredients are still bound up in carboxylic acids.

2. How do you perform decarboxylation?

There are several different methods for decarboxylating cannabis, including heating it in a pan, baking it in the oven, rice cooker, or using a sous vide. The exact method will depend on your preferences and the type of device or appliance you are using. Generally, you will need to heat your marijuana at a relatively low temperature for a long period of time in order to successfully decarboxylate it.

3. How can I store my decarboxylated marijuana?

There are several different methods for storing decarboxylated marijuana, including keeping it in an airtight glass jar or mason jar in a cool, dark place. It is also important to label your container clearly with the date and any other necessary information so that you can easily keep track of when your cannabis was last decarboxylated and when it will expire. You should try to use your decarbed marijuana within 3-6 months.

4. What are the best decarboxylation machines?